The Portable Pneumatic and Electric Machines are used for a variety of applications - the removal of weld, the preparation of tube ends prior to welding and for facing operations.
Bevelling machines are also used on light or heavy wall pipes to simultaneously bevel inside and outside and for facing cuts.

These machines have the semi-automatic capability for repetitive operations.
Interchangeable shaft sets are available for bevelling elbows and u-bends.

One standard shaft covers a wide range of jaws sets for I.D. range of machine.

(Pneumatic operated only)

Specially designed for facing end of tubes
in heat exchangers and condensers.

This machine operates fully automatically.

Specially designed - No kick-back action.

Suitable for bevelling ferrous and non-ferrous tubes

from 19.05 to 42 mm (3/4” to 1 5/8” I.D.).

Optional from 12.5 mm (1/2”).

(Pneumatic or Electric operated)

Specially designed - No kick-back action.

Suitable for bevelling ferrous and non-ferrous tubes

from 28 to 76 mm (1 1/8” to 3” I.D.).

Optional from 19.05 mm (3/4”).

(Pneumatic or Electric operated)

Specially designed - No kick-back action.

Suitable for bevelling ferrous and non-ferrous tubes

from 22 to 111 mm (7/8” to 4 1/4” I.D.).

(Pneumatic or Electric operated)

Specially designed–No kick-back action.

Suitable for bevelling ferrous and non-ferrous tubes

from 39 to 203 mm (1 1/2” to 8” I.D.).

(Pneumatic or Electric operated)

Specially designed - No kick-back action.

Suitable for bevelling ferrous and non-ferrous tubes

from 100 to 306 mm (4” to 12” I.D.).